Quality automation
W03
Inline surface-defect inspection with a documented minimum defect size of 0.05 mm and stated speeds up to 800 m/min.
Overview
The device uses high-speed digital imaging to identify documented cable-surface faults during extrusion and displays the fault position for operator review.
Applications
- Cable and wire extrusion lines
- Surface inspection for round and flat cable products
Documented capabilities
- Detects bulges, deformation, holes, bubbles, cracks, scratches, stains, coke material, peeling and other listed surface faults
- Alarm indication when a surface fault is captured
- Installation instructions are supplied with the equipment
System or test setup
- High-speed digital imaging
- Touch-screen operator interface
- Alarm-light output
Technical specifications
| Minimum stated defect size | 0.05 mm |
|---|---|
| Maximum stated speed | 800 m/min |
| Maximum stated diameter | Up to 150 mm, depending on customer requirements |
| Equipment dimensions | 500 × 1000 × 1750 mm (L × W × H), adjustable |
| Power supply | 220 V or 115 VAC, 50/60 Hz |
W03
Request a quote
